Livestock Waterers Farm Supplies For Sale In San Bernardino

B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref. 14, 15, 16 in parts list.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

1/2" orfice only for the inside of a Franklin Valve.

The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Anti-siphon feature makes this valve approved for Grade A dairy farms.

SPI 351/352 (old style) Rubber Drain Plug only .

We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe. This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

It will take abuse! Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & holds up to chemically active soil conditions. 15" OD, corrugated plastic tubing.

Pride of the Farm's trough drinker is a favorite for feed yards, pastures and dairies. You can drain through a 3 inch opening with a mechanical plug. Extra supply line protection, patented water circulation, multiple constant flow and drain options.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

The orange male fitting end of the Franklin Valve. No inside working parts included.

Blue Flap for WPM20 Cattle Waterer

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

44 1/2" x 13" x 19 3/4". The translucent, non-toxic material allows easy water level viewing and is built to last for years. This sturdy tank is designed to carry two saddles and is easy to install.

Warmer water pushes through the ports and cooler water returns under the baffle. Water circulation is a assisted with our patented baffle design and discharge ports. 70 Gallon Open Trough Tank offers more features.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

This diaphragm fits all Jug Model Valves.

Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included). #11 on breakdown.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

For stalls, corrals and paddocks. Drinker is very easy to clean--no disassembly for cleaning required. The bottom has a cavity for warm climate installations only. The cavity can be used to make the connection from the supply line to our valve.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.