Livestock Waterers Farm Supplies For Sale In Salinas

Float and arm are molded of high-impact styrene and the valve body is made of Delrin. Valve seat rotates for extended life. Overall length is about 6". Inlet pipe thread is 1/2" male and 1/4" female.

More drinking length. Grade A compliant. Water circulation is a assisted with our patented baffle design and discharge ports. Backed with the strongest warranty available. It is loaded with features not available on any competing trough drinker.

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

You will need 2 per valve assembly. #4 on breakdown The connect the Cam & Power Link to the VP124 valve body. Pride of the Farm Link pin only.

Robert's Brass thumbscrew that connects the short arm and long arm.

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve with European Thread for 1-140 PSI with 1/2" female thread is 5" high and 3.75" in diameter.

Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water hammer 3/4″-2 1/2″ water level differential (increases as water inlet pressure increases)...

Guaranteed for 1 year & SAFE IN PLASTIC. Constructed of Cast Aluminum for ultimate effiency & safety. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers.

Apex replacement float with string included.

Blue Flap for WPM20 Cattle Waterer

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

No other parts come with the Cam Link. #2 on breakdown. This is the arm that opens & closes the plunger. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

This piece holds the plunger and upper arm. The inside base of the Franklin Valve. No inside working parts included.

SPI hatch cover for model 4x4 energy free waterer.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights.

White styrofoam round disc float only.

The positive shut-off feature functions in an 8 psi to 140 psi water pressure range. It not only ends flooding, breakdown and water loss, it also does away with breakage of floats, balls, and lever arms by livestock.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

Included with the Valve is a universal mounting kit which permits hook-up to 1/4" copper pipe, 1/2" metal pipe, garden hose or 1" PVC adapter fitting. The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it...

Maximum 24-hour electrical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float...

The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run off. The low profile design and fully hinged door provides animals better access to the water.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation.