Livestock Waterers Farm Supplies For Sale In Roseville

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

SPI 90 degree elbow for all models.

SPI Drain Plug (#11) for all New Generation waterers.

Included with the Valve is a universal mounting kit which permits hook-up to 1/4" copper pipe, 1/2" metal pipe, garden hose or 1" PVC adapter fitting. Valve works with water pressures from 12 to 125 psi.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

Valve 36" Float Cord Only.

This bolt package is for Models 101, 202 & 404 with or without heat.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. The Tru-Test Apex Xtraflo 3/4" Trough Valve Long Tail is a full flow - diaphragm activated, armless, self-cleaning valve...

Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Float Arm for the Mira Fount M3330 waterer.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

You will need 2 per valve assembly. #4 on breakdown The connect the Cam & Power Link to the VP124 valve body. Pride of the Farm Link pin only.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

The Robert's 3/4" brass valve housing only.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Four recessed anchor notches for secure installation. No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Easy access to valve and heater.

Thermostatically controlled to only run when necessary. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic...

Storage compartment is ideal for grooming supplies or for ice to keep things cool. Multiple purpose water caddy is an ideal space-saving solution for easy trailering. Overall dimensions - 35 1/2" long x 16 1/2" wide x 15 1/2" tall.

I often camp where water is not readily available and the added capacity definitely allows a more comfortable or extended stay. The High Country Plastics TC-63 Pickup Bed Water Caddy is an innovative way to haul up to 63 gallons of fresh water in your...