Livestock Waterers Farm Supplies For Sale In Raleigh

SPI foamed 4x4 energy free waterer door only.

The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. Water pressure and 375 gallons per hour capacity. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Useful for feeding or watering rabbits, poultry or any type of small animal. Capacity is one-half pint (1 cup).

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Thermostatically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm. Constructed of Cast Aluminum for ultimate effiency & safety.

Float is easily adjustable for varying water levels, Spring loaded pin allows access panel to pop off with the twist of a screwdriver. Water circulation is assisted with our patented baffle design and discharge ports.

The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line. The heat tube is designed to mate with the cavity under the drinker base.

The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Thermostaically controlled to only run when necessary.

SPI's energy free waterer is built using 100% polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. It has a 15" drinking height, 9 1/2" x 9 1/2" door opening.

This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

Extra capacity 39 gallon tank fits snuggly in the corner. 14” side panels x 14.5” front panel x 72” tall. No stand available for this water caddy. 3-year warranty. Includes a strap/hardware kit and a free 10' hose.

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize...

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, overflow port & dependable non-siphoning Durapride Valve.

Hollow black plug used in all Franklin galvanized waterers.

This Dare farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4 garden hose or adaptable for pipe. We stock all replacement parts.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe. Water pressure and 375 gallons per hour capacity. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

#12-2 on the breakdown. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

Meets "Grade A" Dairy requirements (non-siphoning). Very efficient use of energy. The polyethylene used in our SPI Livestock Waterers is FDA and HPB approved, food grade, recyclable plastic.

Valve seat rotates for extended life. Float Valve for poultry waterers is made of plastic to cut down on corrosion and scale build-up. Overall length is about 6". Inlet pipe thread is 1/2" male and 1/4" female.

Also great for automatic waterers, bird baths, ornamental ponds and fountains. When barley straw is added to water, it begins to decay. Put an end to the hassle of dumping and scrubbing out slimy green water tanks.