Livestock Waterers Farm Supplies For Sale In Pembroke Pines

5 year warranty. Very efficient use of energy. Engineered with the farmer in mind, this waterer allows easy access to submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance product! This waterer...

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve with European Thread for 1-140 PSI with 1/2" female thread is 5" high and 3.75" in diameter.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

The MicroSweeper is designed an manufactured to provide a long life in tough conditions and to deliver unexcelled performance. The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped.

8' 2" Diameter x 26" H 113# 5 Year Warranty All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

No pulleys & cable to foul & rust. Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. Stainless steel bolts & removable top afford easy access to plumbing.

The top entry model provides an air gap, preventing back-flow. XtraFlo compact diaphragm valve has full-flow, high volume fill. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

SPI 351/352 New Generation Gasket.

Robert's Brass cotter key that connects the long arm to the valve body.

The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups. Highly recommended for ALL cold climate installations.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

5 year warranty. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to the trough, thus "no tools are required" to gain access to the valve. Specs: It is 36" wide x 41" long x 19" tall.

Connects to 3/4 garden hose or adaptable for pipe. We stock all replacement parts. This Dare farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Tank dimensions: 51 1/2" long, 29" wide, 24" high. 1 1/4" pipe plug that will accept a heater or float valve system.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

3/4" male to female hose used to hook up the water line to the waterer.

Overall dimensions - 35 1/2" long x 16 1/2" wide x 15 1/2" tall. Molded in beverage holders add to its functionality. Tank features pull plug and vent for easy filling. The unique design includes a 25-gallon water capacity (FDA approved) combined with...

Manufacturer recommends that you secure tank with ratchet tie-downs (not provided) to prevent movement from side-to-side while traveling. Aerodynamic tank designed to fit in the hayrack on top of your trailer.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

Dimensions: 25" x 20" x 23". This One Hole waterer has a 7 gallon tank capacity, waters up to 25 head of Dairy, 50 head of Beef & 75 head of sheep. Maximum 24-hr electrical use on the Jug 101 is 1.56kwh.

Can be mounted individually or back to back. This non-siphoning bowl is extremely resistant to damage and is easy to keep clean. The pressure plate is made of the same strong nylon material, and provides fresh, clean water.

Unaffected by ground movement due to freezing & thawing. 15" OD, corrugated plastic tubing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

A brass rod float arm 1/4" x 2" with threads on each end. Connects valve to 301 round float.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.