Livestock Waterers Farm Supplies For Sale In Oshawa

Overall length is about 6". Valve seat rotates for extended life. Inlet pipe thread is 1/2" male and 1/4" female. Float Valve for poultry waterers is made of plastic to cut down on corrosion and scale build-up.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

SPI 351 (old style) gasket only.

Water pressure and 375 gallons per hour capacity. Anti-siphon feature makes this valve approved for Grade A dairy farms. Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Robert's Brass thumbscrew that connects the short arm and long arm.

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

White styrofoam round disc float only.

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It's design reduces stock damage and minimises blockage. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float.

The rust-proof plastic cover is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

The Robert's 3/4" brass valve housing only.

The non-corrosive metal case is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded...

SPI 351/352 New Generation Gasket.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Hollow black plug used in all Franklin galvanized waterers.