Livestock Waterers Farm Supplies For Sale In Orlando

Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Extra supply line protection, patented water circulation, multiple constant flow and drain options.

This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

#12-3 on the breakdown. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on the Polar Max waterers.

Inlet pipe thread is 1/2" male and 1/4" female. Overall length is about 6". Float and arm are molded of high-impact styrene and the valve body is made of Delrin. Float Valve for poultry waterers is made of plastic to cut down on corrosion and scale build-up.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

White styrofoam triangular disc float only.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.

The top entry model provides an air gap, preventing back-flow. XtraFlo is UV stabilized and corrosion resistant. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built in check valve Fully adjustable Float Angle Pressure range 0-150 PSI Low pressure...

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

Same desription as the J202 EXCEPT THIS UNIT HAS NO HEAT!

SPI 4x4 - 3/8" x 1" x 22' gasket only.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute.

Replacement Low Pressure Valve for Miraco waterers.

Stainless steel bolts & removable top afford easy access to plumbing. No pulleys & cable to foul & rust. Polar Max Drinkers operate like thermos all year long. Serves 350 beef, 150 dairy, 225 cow/calf.

Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning. Rubber shut-off pad and ABS plastic and stainless steel internal parts ensure long life.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

This white pin holds the upper arm to the top base.

Float Arm for the Mira Fount M3330 waterer.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.