Livestock Waterers Farm Supplies For Sale In Orange

Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Grade A compliant. 70 Gallon Open Trough Tank offers more features. Warmer water pushes through the ports and cooler water returns under the baffle.

The non-corrosive metal case is fitted with a 3/4" female hose connection. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

SPI foamed 4x4 energy free waterer door only.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

This unit fits the Model 101, 202 & 404 with or without heat.

Robert's 3/4" leather cup ring that fits on the brass plunger.

SPI 351/352 New Generation Gasket.

Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & holds up to chemically active soil conditions. Unaffected by ground movement due to freezing & thawing.

Megaflow Yellow Float Only.

Simple water level adjustment, easy to clean. Heating cost is minimal-less than $10.00 per heating season. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). Drinker is very easy to clean-no disassembly for cleaning required.

Turns on at 35 degrees & turns off at 45 degrees. Works automatically to ambient temperature. Saves money by using power only when temperatures require. Five controlled temperatures (one just right for you) & no installation required.

Connects to 3/4 garden hose or adaptable for pipe. This Dare farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. We stock all replacement parts.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

This economy tank-side mounting bracket fastens securely with a thumb screw and bushing--no tools needed! Connects directly to garden hose, and fits all standard tanks and some plastic tanks.

The inside base of the Franklin Valve. This piece holds the plunger and upper arm. No inside working parts included.

Arkfeld waterer element replacement. 1000 watt x 240 volt heating element only.

Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included). #11 on breakdown.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

Replacement Low Pressure Valve for Miraco waterers.

The Robert's 3/4" brass valve housing only.

Robert's 3/4" rubber plunger seat only.

Contains J-bolt brackets which mount to tank edge. PVC pipe from valve to hose threads.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Tank dimensions: 51 1/2" long x 29" wide x 14" high. 5-year warranty.