Livestock Waterers Farm Supplies For Sale In Ontario

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

SPI hatch cover for model 4x4 energy free waterer.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

SPI Drain Plug (#11) for all New Generation waterers.

SPI white corrugated baffle for model 4x4 energy free waterer.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 1/4" Orifice on a VP124 Valve.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

Trough-O-Matic Float Valve Repair Kit

Can be used with Mirafount or other brand installations. 14" x 30" long, 2" thick. Protect your underground water line from freezing.

#1 on breakdown. No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Pride of the Farm Element for electric waterer units.

Continuous flow disc and repair kit for use with Hudson valves.

Robert's 3/4" leather cup ring that fits on the brass plunger.

That means less pumping and less impoundement of run-off. * The Ice Sweeper comes with a full 3-year limited replacment warranty, exclusive only of exposed seals. Only water that is close to freezing is discharged.

FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built in check valve Fully adjustable Float Angle Pressure range 0-150 PSI Low pressure...

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. All edges have been rounded for safety and strength.

Robert's Brass cotter key that connects the long arm to the valve body.

Johnson Waterer Element Clips to hold the heating element.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

Small inlet high pressure valve.

Dimensions: 41" x 20" x 23". Maximum 24-hour electrical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow. XtraFlo compact diaphragm valve has full-flow, high volume fill.