Livestock Waterers Farm Supplies For Sale In Omaha

This waterer has a MAX usage of 120 Beef, 50 Dairy or 135 Sheep. Peaked roof & raised ribs around the door openings prevents manure, feed & other contaminants from being washed into the bowl.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Valve installs in any type of tank up to 1/2" wall thickness. The Freeland Valve for livestock watering tanks is automatic, adjustable, approved non-siphoning, corrosion-proof and freeze-resistant.

SPI 351/352 New Generation Gasket.

Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning. The Hudson Valve"s unique design maintains fluid level in tanks and troughs with an exceptional patented float system.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning. The Hudson Valve"s unique design maintains fluid level in tanks and troughs with an exceptional patented float system.

Manufacturer recommends that you secure tank with ratchet tie-downs (not provided) to prevent movement from side-to-side while traveling. Aerodynamic tank designed to fit in the hayrack on top of your trailer.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless,...

Screw that holds the float connect to the top of the float.

The orange male fitting end of the Franklin Valve. No inside working parts included.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Arkfeld waterer element replacement. 1000 watt x 120 volt heating element only.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved...

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

Pride of the Farm Element for electric waterer units.

Contains J-bolt brackets which mount to tank edge. PVC pipe from valve to hose threads.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Clear plastic allows you to see the water level easily. New sleek design tanks work for three different applications. Tanks measure 63 1/2" L x 18" W x 12" deep. Constructed of an FDA-approved plastic.

This bolt package is for Models 101, 202 & 404 with or without heat.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.