Livestock Waterers Farm Supplies For Sale In Olathe

SPI 3.75" Brass Short Float Stem only.

The top entry model provides an air gap, preventing back-flow. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Working pressure range is 4-175 psi, working water temperature range 34-140°F.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Valve installs in any type of tank up to 1/2" wall thickness. The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it operates with a simple reliable design requiring no floats, rods or guards.

Grade A compliant. Warmer water pushes through the ports and cooler water returns under the baffle. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs. The rust-proof plastic cover is fitted with a 3/4" female hose connection.

Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. No other parts are included with this Power Link. #1 on breakdown.

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

This bolt package is for Models 101, 202 & 404 with or without heat.

This repair kit fits the Models 101, 202 & 404 with or without heat.

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Guaranteed for 1 year & SAFE IN PLASTIC. Thermostatically controlled to only run when necessary.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse! 15" OD, corrugated plastic tubing.

Easy to install & installs in only minutes. Guaranteed for 1 year & SAFE IN PLASTIC. Unit is unnoticed by livestock - no cord in water. Thermostatically controlled to only run when necessary.

This white pin holds the upper arm to the top base.

Both the water line & the electrical supply can enter from below. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line.

Thermostat ONLY for all Johnson Concrete Waterer Models.

The top entry model provides an air gap, preventing back-flow. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

Pride of the Farm VP124 plastic valve body only. No lock pins or inner parts included. #3 on breakdown.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

There are no loose parts, Lower access panels on each end. Each opening is 5" x 9", Superb supply line protection. You can drain through a 3 inch opening with a mechanical plug. Other components 5 years unconditional warranty and an additional 6 year...

This Dare anti-siphon farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe.