Livestock Waterers Farm Supplies For Sale In Oklahoma

SPI foamed 4x4 energy free waterer door only.

Pride of the Farm Element for electric waterer units.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

Included with the Valve is a universal mounting kit which permits hook-up to 1/4" copper pipe, 1/2" metal pipe, garden hose or 1" PVC adapter fitting. Valve works with water pressures from 12 to 125 psi.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

All edges have been rounded for safety & strength. The larger tanks come with 1.25� drains installed. 28 1/2" x 20" x 10 1/4" High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure...

Robert's 3/4" leather cup ring that fits on the brass plunger.

This diaphragm fits all Jug Model Valves.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 1/2" orifice Valve complete with plunger and arms.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Comes with an 8' heavy duty hose with ball valve to fill from the bottom, 2 mounting straps to secure it to hay rack. 65” long x 9” high x 15 1/2” wide. 35 gallon FDA approved plastic is warranted for 3 years.

Grade A compliant. You can drain through a 3 inch opening with a mechanical plug. Other components 5 years unconditional warranty and an additional 6 year pro-rated warranty. Float is easily adjustable for varying water levels, Spring loaded pin allows...

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

A round float for Arkfeld,SPI or Mira Fount waterers.

Same description as J101 EXCEPT THIS UNIT HAS NO HEAT.

Each model comes with anchors for mounting to concrete pad, pipe insulation, and a section of 3/4" PVC pipe. Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the valve.

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation. Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red & Tan available by special...

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

Holds 15 gallons. Ideal for 100 head of sheep. 28” x 26” x 14” tall. Only requires 4kW of electricity during a week of 25 below zero temperatures. Four 6” openings with 7” ball closures.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red...

Trough-O-Matic Float Valve Repair Kit

The positive shut-off feature functions in an 8 psi to 140 psi water pressure range. Mounting bracket sold separately. It not only ends flooding, breakdown and water loss, it also does away with breakage of floats, balls, and lever arms by livestock.