Livestock Waterers Farm Supplies For Sale In Ohio

Valve works with up to 70 lbs. The rust-proof plastic cover is fitted with a 3/4" female hose connection. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Heater included: 250 watts, 110 volts. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which...

80 Watt Immersible element used in the PC 1 waterer.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

The orange cap only that fits over the insides of the Franklin Valve.

Heating element ONLY for the Johnson Concrete Model J360.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level. Robert's Brass 1/2" orifice Valve complete with plunger and arms.

Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. They are made for tanks which have the valve mounted above or below the water. The Topaz is compact, robust and manufactured from non-corroding materials.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

Constructed with FDA-approved materials, with a vent in the fill cap on top of the caddy. 3-year warranty. No stand available for this water caddy. 14” side panels x 14.5” front panel x 72” tall.

The Robert's 3/4" brass valve housing only.

It will take abuse! Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

Maximum 24-hour electrical use is 1.56 kwh. Dimensions: 41" x 20" x 23". Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

Constructed of an FDA-approved plastic, the Hay Rack Water Caddy comes with a 8' hose kit and shut-off valve to allow filling from the ground. Has a 3-year manufacturer's guarantee.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. Nature's ground water temperature does this job. The WPM14 is an extremely rugged 4 door opening, energy free unit for hogs.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

This white pin holds the upper arm to the top base.

Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. Nature's ground water temperature does this job. The WPM120 is an extremely rugged 6 door opening, energy free unit for cattle.

Ideal for use in Ponds 50 to 600 gallons. Constructed of Cast Aluminum for ultimate efficiency & safety. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. Features heavy duty anti-chew protector.

5 year warranty. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to the trough, thus "no tools are required" to gain access to the valve. Earth Tube is suggested with installation.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

No lock pins or inner parts included. #3 on breakdown. Pride of the Farm VP124 plastic valve body only.