Livestock Waterers Farm Supplies For Sale In Oceanside

SPI hatch cover for model 4x4 energy free waterer.

Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

3/4" orfice only for the inside of a Franklin Valve.

It has a 15" drinking height, 9 1/2" x 9 1/2" door opening. This unit is insulated with 3 1/2" of polyurethane insulation. Finally, the waterers are designed with rounded corners to handle livestock abuse while ensuring livestock safety.� Specs: It...

Control Diaphragm w/ ABS Stem & Strainer

White styrofoam triangular disc float only.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

SAFE IN PLASTIC. Thermostatically controlled to only run when necessary. Designed to fit into narrow opening in any hog waterer resevoir. Unit measures 7" in diameter, 110v, 1000 Watts.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Blue Flap for WPM20 Cattle Waterer

It will take abuse! Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. 15" OD, corrugated plastic tubing.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

Valve works with up to 70 lbs. Water pressure and 375 gallons per hour capacity. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4"...

Can be mounted individually or back to back. The pressure plate is made of the same strong nylon material, and provides fresh, clean water. Made of Strangkolon-nylon material. This non-siphoning bowl is extremely resistant to damage and is easy to keep...

Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm. #5 on breakdown.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

A drain plug for Arkfeld waterers - 2" in size - Cork.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included). #11 on breakdown.

Model WP012 is loaded & is also one of the better looking drinkers ever to reach the market. 250W heater, 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous flow operation, rugged notches...

The Pride of the Farm the Performance One E-Drink is electrically heated Energy Efficient You Only Need One Unit to Water Up to 150 Head of Most Any Species. Tough enough for years of outdoor use.

Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.