Livestock Waterers Farm Supplies For Sale In Newport News

Float and arm are molded of high-impact styrene and the valve body is made of Delrin. Float Valve for poultry waterers is made of plastic to cut down on corrosion and scale build-up.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

The orange male fitting end of the Franklin Valve. No inside working parts included.

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

The rust-proof plastic cover is fitted with a 3/4" female hose connection. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs.

Water circulation is a assisted with our patented baffle design and discharge ports. It is loaded with features not available on any competing trough drinker. It has 70 inches of drinking length and holds 70 gallons.

Arkfeld waterer element replacement. 600 watt x 120 volt heating element only

SPI white corrugated baffle for model 4x4 energy free waterer.

O'Ring only replacement for Frost Pro Accessory.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

Capacity: 100 hd hogs, 2 lift up lids. This exchange of water keeps the water warm even in the coldest climate. Tested in continental U.S. to remain frost-free with as few as 6 head drinking every other day.

The MicroSweeper is designed an manufactured to provide a long life in tough conditions and to deliver unexcelled performance. The MicroSweeper requires no maintenance, no electricity and no adjustment, EVER.

Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably when the threat of the water freezing is gone. * Compared to warming tanks with heaters, the Ice Sweeper saves money.

Tank dimensions: 51 1/2" long x 29" wide x 14" high. 5-year warranty.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

Robert's Brass thumbscrew that connects the short arm and long arm.

High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability and longevity.

The brass arm and black round ball float only for an Apex Valve.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

The low profile design and fully hinged door provides animals better access to the water. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to the trough, thus "no tools are required" to gain access to the valve.

SPI 3.75" Brass Short Float Stem only.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

2-2" drain holes for fast clean out. Livestock can drink out of both flaps at the same time, not always so with a ball closure. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.