Agiseek home

Livestock Waterers Farm Supplies For Sale In New Hampshire

Become a Partner
SPI 4x4 Gasket
Prices start at : 34.70 USD

SPI 4x4 - 3/8" x 1" x 22' gasket only.
United States
New Hampshire
Franklin Long Float Arm
Prices start at : 8.90 USD

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.
United States
New Hampshire
SPI 351 Gasket
Prices start at : 11.85 USD

SPI 351 (old style) gasket only.
United States
New Hampshire
Franklin Valve Plunger Seat ONLY
Prices start at : 1.35 USD

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.
United States
New Hampshire
Replacement Float & Arm f/ WFD85
Prices start at : 21.00 USD / each

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.
  • Weight: 1 lbs
United States
New Hampshire
3/8\
Prices start at : 28.05 USD

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.
United States
New Hampshire
Farm Innovator Cast Aluminum Utility 250W De-Icer
Prices start at : 45.50 USD

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Constructed of Cast Aluminum for ultimate effiency & safety. Guaranteed for 1 year & SAFE IN PLASTIC.
United States
New Hampshire
Jug Top Weatherseal Kit
Prices start at : 16.00 USD

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.
United States
New Hampshire
Xtraflo Long Tail Trough Valve - 3 / 4\
Prices start at : 52.50 USD / each

The top entry model provides an air gap, preventing back-flow. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.
  • Weight: 1 lbs
United States
New Hampshire
Franklin Short Float Arm
Prices start at : 8.90 USD

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.
United States
New Hampshire
Pride of the Farm 1 Gallon Box Stall Drinker w/o Heat
Prices start at : 210.00 USD

OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.
United States
New Hampshire
Mira Fount Valve Plunger Seat Only for BLUE VALVE ONLY
Prices start at : 0.45 USD

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.
United States
New Hampshire
Dare Anti-Siphon Float Valve
Prices start at : 29.60 USD / each

We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe. This Dare anti-siphon farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.
  • Weight: 1.8 lbs
United States
New Hampshire
Franklin 40W x 36\
Prices start at : 46.75 USD

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.
United States
New Hampshire
The Jug 4 Hole Waterer w/Heat
Prices start at : 1071.00 USD

It's maximum 24-hr electical use is 1.56 kwh. This Jug 4 Hole Waterer has a 45 gallon tank capacity & waterers 125 head of Dairy, 250 head of Beef & 300 head of Sheep. Dimensions: 39" x 37" x 23"
United States
New Hampshire
SPI Insulated Earth Tube
Prices start at : 135.00 USD

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. It has an excellent insulating property of R15 and amazing structural strength. Highly recommended for ALL cold climate installations.
United States
New Hampshire
Brass Short arm
Prices start at : 6.65 USD

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.
United States
New Hampshire
Jug 4\' Uninsulated Earth Tube
Prices start at : 51.00 USD

Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & holds up to chemically active soil conditions. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.
United States
New Hampshire
Farm Innovator Drain Plug 1500W De-Icer
Prices start at : 51.70 USD

Easy to install & installs in only minutes. Thermostatically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power.
United States
New Hampshire
Jug Complete Float Valve
Prices start at : 59.00 USD

This unit fits the Model 101, 202 & 404 with or without heat.
United States
New Hampshire
3/4\
Prices start at : 16.00 USD

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.
United States
New Hampshire
Metal Float Valve w/Hose Connection
Prices start at : 19.20 USD / each

Valve works with up to 70 lbs. The non-corrosive metal case is fitted with a 3/4" female hose connection. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.
  • Weight: 1.5 lbs
United States
New Hampshire
Johnson Concrete 48\
Prices start at : 880.00 USD

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...
United States
New Hampshire
Franklin 80 W Immersible Element
Prices start at : 46.75 USD

80 Watt Immersible element used in the PC 1 waterer.
United States
New Hampshire
Trough-O-Matic Stock Tank Float Valve with Plastic Housing
Prices start at : 11.49 USD / each

Rugged plastic housing is molded from high-grade polystyrene. Trough-O-Matic Stock Tank Float Valve with Plastic Housing flows up to 245 gallons per hour and operates between 10-70 psi.
United States
New Hampshire
Freeland Free-Flow Fill Valve
Prices start at : 34.33 USD / each

Valve installs in any type of tank up to 1/2" wall thickness. Included with the Valve is a universal mounting kit which permits hook-up to 1/4" copper pipe, 1/2" metal pipe, garden hose or 1" PVC adapter fitting.
  • Weight: 2.75 lbs
United States
New Hampshire
Monticello .45 Orfice Valve Only
Prices start at : 25.00 USD

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.
United States
New Hampshire