Agiseek home

Livestock Waterers Farm Supplies For Sale In Nashville Davidson

Become a Partner
SPI Valve to Standpipe Elbow
Prices start at : 3.45 USD

SPI 90 degree elbow for all models.
Nashville-Davidson
Cage Cup--1/2 Pint--Black
Prices start at : 2.70 USD / each

Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Useful for feeding or watering rabbits, poultry or any type of small animal. Capacity is one-half pint (1 cup).
  • Weight: 0.13 lbs
Nashville-Davidson
3/4\
Prices start at : 42.65 USD

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.
Nashville-Davidson
Xtraflo Trough Valve & Float
Prices start at : 42.03 USD / each

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.
  • Weight: 1 lbs
Nashville-Davidson
Pride of the Farm 1 Gallon Box Stall Drinker w/Heat
Prices start at : 266.00 USD

Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations. No freezing occurred at this temperature-even after 7 days! Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9...
Nashville-Davidson
Brass Cotter Key
Prices start at : 0.95 USD

Robert's Brass cotter key that connects the long arm to the valve body.
Nashville-Davidson
Float Valve Repair Kit
Prices start at : 8.16 USD / each

Includes seat and float. Repair Kit for Water Control Valves model 825H , 825P , 830H , 830P , 825ASH and 825ASP .
  • Weight: 1 lbs
Nashville-Davidson
The Jug Corner Mount Stall Waterer w/o Heat
Prices start at : 350.00 USD

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!
Nashville-Davidson
Pride of the Farm 325w Coil Element w/26\
Prices start at : 69.50 USD

Pride of the Farm Element for electric waterer units.
Nashville-Davidson
3/4\
Prices start at : 26.05 USD

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.
Nashville-Davidson
Jug 2\' Uninsulated Earth Tube
Prices start at : 35.00 USD

Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Won't rust, resists rot & holds up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth.
Nashville-Davidson
3/4\
Prices start at : 58.00 USD

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.
Nashville-Davidson
Dare Float Valve
Prices start at : 13.92 USD / each

This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.
  • Weight: 1 lbs
Nashville-Davidson
Franklin Valve Base Screw
Prices start at : 1.10 USD

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.
Nashville-Davidson
Repair Kit f/ 1\
Prices start at : 23.12 USD / each

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.
  • Weight: 1 lbs
Nashville-Davidson
Franklin 285W Element
Prices start at : 31.77 USD

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.
Nashville-Davidson
Monticello .25 Orfice Valve Only
Prices start at : 25.00 USD

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.
Nashville-Davidson
Pride of the Farm 17 Gallon Super Drinker w/o Heat
Prices start at : 375.00 USD

No loose parts to lose. Two 2 inch side drains and 1 threaded bottom port for optional inside drain. 100% poly construction. Two large drink openings 8" x 14" each. Over 300 square inches of access for easy hook up.
Nashville-Davidson
1 1/2\
Prices start at : 2.55 USD

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.
Nashville-Davidson
Johnson 500w x 120v Heating Element
Prices start at : 32.45 USD

Heating element ONLY for the Johnson Concrete Model J360.
Nashville-Davidson
Franklin Long Float Arm
Prices start at : 8.90 USD

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.
Nashville-Davidson
3/4\
Prices start at : 1.95 USD

Robert's 3/4" rubber cup ring that fits on the brass plunger.
Nashville-Davidson
Mira Fount Float Arm
Prices start at : 16.20 USD

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.
Nashville-Davidson
PRIDE STOCKTANK W/BUILT IN HOG DRINKER
Prices start at : 245.00 USD

-Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker Opening is: 14.0"(35.6 cm )W 16.5"(41.9 cm) H 12.0"(30.5 cm) D
Nashville-Davidson
600W x 240V Element with Thermostat
Prices start at : 100.00 USD

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.
Nashville-Davidson
Farm Innovator Drain Plug 1500W De-Icer
Prices start at : 51.70 USD

Easy to install & installs in only minutes. Guaranteed for 1 year & SAFE IN PLASTIC. Unit is unnoticed by livestock - no cord in water. Thermostatically controlled to only run when necessary.
Nashville-Davidson
Pride of the Farm 1/4\
Prices start at : 3.65 USD

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 1/4" Orifice on a VP124 Valve.
Nashville-Davidson