Livestock Waterers Farm Supplies For Sale In Murfreesboro

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and has a capacity of 375 gallons per hour. Valve works with up to 70 lbs. The non-corrosive metal case is fitted with a 3/4" female hose connection.

SPI hatch cover for model 4x4 energy free waterer.

There are four base screws that hold the top base to the bottom base. These are not included when ordering a base only.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

Pride of the Farm 5/32" Orifice on a VP124 Valve. #7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included).

Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. #1 on breakdown. No other parts are included with this Power Link.

Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers. Turns on at 36 degrees and turns off at 48 degrees.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental...

No diaphragm, cam link and power link which are three fewer maintenance items. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well as other energy-free drinkers.

The Robert's 3/4" brass valve housing only.

Robert's 3/4" rubber plunger seat only.

Polar Max Drinkers operate like thermos all year long. Unique baffles guard against icing & keep valve operating under severest conditions. Dependable, non siphoning valve - proven & trouble free.

The VS20LPC has an insulated valve cavity and one piece hatch for no air loss. The brass valve and submersible heater are both enclosed by the valve hatch. No more rust or corrosion! These electric waterers are built of a polyethylene construction creating...

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental...

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

15" OD, corrugated plastic tubing. Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & holds up to chemically active soil conditions.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

SPI 4x4 Rubber Drain Plug only.

The orange cap only that fits over the insides of the Franklin Valve.

Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included). #11 on breakdown.

Tank dimensions: 51 1/2" long, 29" wide, 24" high. 1 1/4" pipe plug that will accept a heater or float valve system.

Capacity: 250 hd beef, 90 hd dairy, 4-9 1/2" ball closure, removable end panels. Waterers work on the same principle as a thermos bottle. Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the...

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

XtraFlo compact diaphragm valve has full-flow, high volume fill. XtraFlo is UV stabilized and corrosion resistant. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Five controlled temperatures (one just right for you) & no installation required. Turns on at 35 degrees & turns off at 45 degrees. Works automatically to ambient temperature. Has many uses around the home & farm.