Livestock Waterers Farm Supplies For Sale In Montreal

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. The top entry model provides an air gap, preventing back-flow.

It has double walled foam-filled molded polyethylene construction. Engineered with the farmer in mind, this waterer allows easy access to the submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance...

Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Capacity is one-half pint (1 cup). Useful for feeding or watering rabbits, poultry or any type of small animal.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.

Works automatically to ambient temperature. Saves money by using power only when temperatures require. Turns on at 35 degrees & turns off at 45 degrees. Five controlled temperatures (one just right for you) & no installation required.

Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning. Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off.

Operates effecicently at the bottom of the bucket because warm water rises. SAFE IN PLASTIC. 1 year warranty. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures.

University testing showed that the fountain worked when temperatures were at -100 degrees wind chill and never required any external energy source. Frame and cover are made of high impact Rock-ite.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Control Diaphragm w/ ABS Stem & Strainer

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

Trough-O-Matic Float Valve Repair Kit

The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. Valve works with up to 70 lbs. Water pressure and 375 gallons per hour capacity. The Trough-O-Matic float valve features a longer, deeper float which gives more...

SPI 351 (old style) gasket only.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

This repair kit fits the Models 101, 202 & 404 with or without heat.

Won't rust, resists rot & holds up to chemically active soil conditions. Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. The top entry model provides an air gap, preventing back-flow.

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.