Livestock Waterers Farm Supplies For Sale In Montgomery

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

SPI 351 (old style) gasket only.

Control Diaphragm w/ ABS Stem & Strainer

Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee. THIS UNIT IS FOR METAL TANKS ONLY. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary.

White styrofoam triangular disc float only.

Very efficient use of energy. The VS15E is molded from a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. 5 year warranty.

Thermostatically controlled to only run when needed. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. Ideal for use in Ponds 50 to 600 gallons. Features heavy duty anti-chew protector.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

600 watt x 240 volt heating element only. Arkfeld waterer element replacement.

It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures.

Includes seat and float. Repair Kit for Water Control Valves model 825H , 825P , 830H , 830P , 825ASH and 825ASP .

Works automatically to ambient temperature. Turns on at 35 degrees & turns off at 45 degrees. Has many uses around the home & farm. Saves money by using power only when temperatures require.

The bottom has a cavity for warm climate installations only. AS VERSATILE AS YOU CAN GET. No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. XtraFlo is UV stabilized and corrosion resistant. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

Constructed of an FDA-approved plastic, the Hay Rack Water Caddy comes with a 8' hose kit and shut-off valve to allow filling from the ground. New sleek design tanks work for three different applications.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom.

The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped. In operation, the MicroSweeper turns on at 41 degrees (F) and turns off at 42 degrees (F).

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Capacity is one-half pint (1 cup).

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

Use this valve assembly with the J303 with without heat.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.