Livestock Waterers Farm Supplies For Sale In Miramar

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

Repair Kit for 716H Valve. Includes screen, retainer ring, diaphragm, shut-off pad and float.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

14, 15, 16 in parts list. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

SPI 2 1/2" Brass Short Float Stem only.

The Robert's 3/4" brass valve housing only.

No more-no less. In operation, the MicroSweeper turns on at 41 degrees (F) and turns off at 42 degrees (F). It is a thermal sensing valve that is constatly in contact with the water & "intermittently" releases enough pressurized water to prevent surface...

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

White polyethylene disc float only.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Won't rust, resists rot & hold up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. We stock all replacement parts.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved...

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved...

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

XtraFlo compact diaphragm valve has full-flow, high volume fill. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Optimum pressure range is 20 to 50 psi. Ideal for horses, cattle, dogs and other similar sized animals. U-bolts are not provided. Duramate Automatic Horse & Livestock Waterer is a large capacity 16-quart waterer is molded from impact-resistant polyethylene...

Electric Water Heater Base is used to prevent metal poultry waterers from freezing in temperatures as low as 10 degrees F. Cord should be protected from animals and used with a ground fault protected outlet.