Livestock Waterers Farm Supplies For Sale In Minnesota

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

SPI white corrugated baffle for model 4x4 energy free waterer.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece...

52" L x 30 3/4" W x 24" H 33# 5 year warranty High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Thermostat ONLY for all Johnson Concrete Waterer Models.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

Has a 3-year manufacturer's guarantee. New sleek design tanks work for three different applications. Fits most flat walls of trailers and comes with a shut-off valve and two tie straps.

Corrugated design provides rigidity without bulk when back filled with earth. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

3/4" male to female hose used to hook up the water line to the waterer.

This non-siphoning bowl is extremely resistant to damage and is easy to keep clean. Made of Strangkolon-nylon material. Can be mounted individually or back to back. The pressure plate is made of the same strong nylon material, and provides fresh, clean...

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

Jug Thermostat fits Models 101, 202, 303 & 404 with heat.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the valve. Now a waterer that requires no electricity, so it saves 100% of your energy costs.

This bolt package is for Models 101, 202 & 404 with or without heat.

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

52 1/2" L x 46 1/4" W x 23 1/2" H 34# 5 Year warranty High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

The Topaz is compact, robust and manufactured from non-corroding materials. They are made for tanks which have the valve mounted above or below the water. Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

Hay rack not included. New sleek design tanks work for three different applications. (Manufacturer recommends also securing with ratchet tie downs.) Clear plastic allows you to see the water level easily.

Powder coated, anti-bacterial steel bowl has non-siphoning float to maintain constant water level. Water line entry on either side with 1/2" brass fitting. Use for horses, sheep, calves and other livestock.

You don't need extra heat to keep the line above the ground open. 100% poly construction. A typical winter heating bill of $10.00 or less! Why? Our R-valve of 7.5 per inch holds the heat provided by incoming water.