Livestock Waterers Farm Supplies For Sale In Miami Gardens

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve for 1-140 PSI with 1" female thread is 5" high and 3.75" in diameter.

This economy tank-side mounting bracket fastens securely with a thumb screw and bushing--no tools needed! Connects directly to garden hose, and fits all standard tanks and some plastic tanks.

SPI foamed 4x4 energy free waterer door only.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

Polyethylene Blue in color. 5 year warranty. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. 22" W x 32" L x 26" H

Arkfeld waterer element replacement. 1000 watt x 240 volt heating element only.

Inlet pipe thread is 1/2" male and 1/4" female. Overall length is about 6". Valve seat rotates for extended life. Float and arm are molded of high-impact styrene and the valve body is made of Delrin.

Aqua Blue color only. The tank also comes with a 1.25" drains installed. 3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

25-gallon FDA approved plastic has a valve located at the bottom of the tank which allows you to water your horses in transit, or at your destination with water from home. This tank fits conveniently into the "dead space" in the corner of the walk-in...

The rust-proof plastic cover is fitted with a 3/4" female hose connection. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and has a capacity of 375 gallons per hour.

The brass valve and submersible heater are both enclosed by the valve hatch. 5 year warranty. No more rust or corrosion! These electric waterers are built of a polyethylene construction creating a strong corrosion free product to provide many years of...

The translucent, non-toxic material allows easy water level viewing and is built to last for years. Eliminate the problem of poor water quality and quit hauling those buckets! Measures approx.

No heat well needed; use an 8-12" tile; can be fitted on most existing pads. Weather strip & an insulated sleeve for the supply line come with each unit. Seamless sidewall cannot leak.

Two 2 inch side drains and 1 threaded bottom port for optional inside drain. Our R-valve of 7.5 per inch holds the heat provided by incoming water. You do need proper installation to prevent the supply line underneath the drinker from freezing.

The heat tube is designed to mate with the cavity under the drinker base. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line.

Manufacturer recommends that you secure tank with ratchet tie-downs (not provided) to prevent movement from side-to-side while traveling. 3 year warranty. 35 gallon FDA approved plastic is warranted for 3 years.

14" x 30" long, 2" thick. Protect your underground water line from freezing. Can be used with Mirafount or other brand installations.

Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Capacity is one-half pint (1 cup).

Tank measures 64 1/2" L x 18" W x 12" deep. Constructed of an FDA-approved plastic. Clear plastic allows you to see the water level easily. Has a 3-year manufacturer's guarantee. New sleek design tanks work for three different applications.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.