Livestock Waterers Farm Supplies For Sale In Mesquite

B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker. B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached)

This piece holds the plunger and upper arm. No inside working parts included. The inside base of the Franklin Valve.

The low profile design and fully hinged door provides animals better access to the water. 22 gallon capacity with a maximum usage of 150 Beef cows. Finally, the waterers are designed with rounded corners to handle livestock abuse while ensuring livestock...

SPI 2 1/2" Brass Short Float Stem only.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing...

SAFE IN PLASTIC. Operates effecicently at the bottom of the bucket because warm water rises. 1 year warranty. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

SPI white corrugated baffle for model 4x4 energy free waterer.

SPI 351/352 New Generation Gasket.

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.

A drain plug for Arkfeld waterers - 2" in size - Cork.

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic cover is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Arkfeld waterer element replacement. 600 watt x 120 volt heating element only

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

This tank fits conveniently into the "dead space" in the corner of the walk-in tack room. 25-gallon FDA approved plastic has a valve located at the bottom of the tank which allows you to water your horses in transit, or at your destination with water...

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC.

Each valve comes with installation instructions, warranty information and parts list. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

The Topaz is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. Features Has Detach for quick access to valve seal Mounts horizontally or vertically...

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.