Livestock Waterers Farm Supplies For Sale In Mesa

Water circulation is a assisted with our patented baffle design and discharge ports. Warmer water pushes through the ports and cooler water returns under the baffle. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line. You should use silicon caulk to assure an airtight fit.

SPI 351/352 New Generation Gasket.

Foam filled-R value of 7.5 per inch. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Drinker is very easy to clean-no disassembly for cleaning required.

For easy loading and unloading. Features 4 built-in cup holders to hold drinks or spray bottles, and a center storage area with lid to store miscellaneous items. Center of water tank tapers down in the middle for visibility.

Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. No other parts come with the Cam Link. This is the arm that opens & closes the plunger. #2 on breakdown.

This bolt package is for Models 101, 202 & 404 with or without heat.

Can only be used with the Upright Water Caddy (24183). Includes storage compartment. An added bonus is a 7 1/3” wide x 5 1/2” tall opening for additional storage. Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021).

Inside repair kit for Topaz & Megaflow Valve.

Polar Max Drinkers operate like thermos all year long. The WPM14 is an extremely rugged 4 door opening, energy free unit for sheep or calves. Stainless steel bolts & removable top afford easy access to plumbing.

14" x 30" long, 2" thick. Can be used with Mirafount or other brand installations. Protect your underground water line from freezing.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary. Constructed of Cast Aluminum for ultimate effiency & safety.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

Holds 15 gallons. Ideal for 100 head of sheep. Approximately 57 lbs. Made of durable polyethylene construction and has stainless steel anchor bolts included. 28” x 26” x 14” tall.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Ideal for horses, cattle, dogs and other similar sized animals. Optimum pressure range is 20 to 50 psi. Includes 3/4” hose attachment and metal brackets for installation on a fence or wall.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

5 year warranty. SPI's energy free waterer is built using 100% polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. Up to 50% more usable water capacity than the competition.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 5/32" Orifice on a VP124 Valve.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

Dependable, non-siphoning Durapride valve. Lower access opening is 6" x 19". Model WP012 is loaded & is also one of the better looking drinkers ever to reach the market. It takes a quarter turn with a straight edge screwdriver.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.