Livestock Waterers Farm Supplies For Sale In Mcallen

80 Watt Immersible element used in the PC 1 waterer.

SPI foamed 4x4 energy free waterer door only.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run off. Earth Tube is suggested with installation.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. SAFE IN PLASTIC TANKS. 1 year warranty. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed...

They are made for tanks which have the valve mounted above or below the water. The Topaz is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit. The VS15E is molded from a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation.

Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers.

The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line. You should use silicon caulk to assure an airtight fit.

This piece holds the plunger and upper arm. No inside working parts included. The inside base of the Franklin Valve.

New sleek design tanks work for three different applications. Constructed of an FDA-approved plastic. Has a 3-year manufacturer's guarantee. Comes with shut-off valve. The Lay Down tank is an easy way to haul water on the floor of your trailer or in the...

Pride of the Farm Link pin only. You will need 2 per valve assembly. #4 on breakdown The connect the Cam & Power Link to the VP124 valve body.

No lock pins or inner parts included. #3 on breakdown. Pride of the Farm VP124 plastic valve body only.

Thermostatically controlled to only run when necessary. Easy to install & installs in only minutes. Unit is unnoticed by livestock - no cord in water. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power.

High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability and longevity.

Dependable, non siphoning valve - proven & trouble free. Weather strip & an insulated sleeve for the supply line come with each unit. No pulleys & cable to foul & rust. Seamless sidewall cannot leak.

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

This diaphragm fits all Jug Model Valves.

Measures 37” x 27 1/2” x 13”, ash grey color. 5-year warranty. 35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug).

Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve. Suggested where sugar sand is a problem in the water supply.

SPI 351/352 (old style) Rubber Drain Plug only .

Use this valve assembly with the J303 with without heat.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

It's design reduces stock damage & minimises blockage. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level...