Livestock Waterers Farm Supplies For Sale In Manitoba

SPI 351/352 New Generation Gasket.

Capacity is one-half pint (1 cup). Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Useful for feeding or watering rabbits, poultry or any type of small animal.

This two hole, 5.2 gallon waterers uses a 250 or 500 watt submersible heater and can easily ship UPS. 5 year warranty. The brass valve and submersible heater are both enclosed by the valve hatch.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. Working pressure range is 4-175 psi, working water temperature range 34-140°F.

The low profile design and fully hinged door provides animals better access to the water. Earth Tube is suggested with installation. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed...

80 Watt Immersible element used in the PC 1 waterer.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. Highly recommended for ALL cold climate installations. It has an excellent insulating property of R15 and amazing structural strength.

The orange cap only that fits over the insides of the Franklin Valve.

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic cover is fitted with a 3/4" female hose connection.

SPI hatch cover for model 4x4 energy free waterer.

Heating element ONLY for the Johnson Concrete Model J360.

Arkfeld waterer element replacement. 1000 watt x 240 volt heating element only.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It's design reduces stock damage & minimises blockage.

Use this valve assembly with the J303 with without heat.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

Apex replacement float with string included.

New sleek design tanks work for three different applications. Hay rack not included. Also comes with two tie straps. Constructed of an FDA-approved plastic, the Hay Rack Water Caddy comes with a 8' hose kit and shut-off valve to allow filling from the...

New silicone shut-off pad and ABS plastic and stainless steel internal parts ensure long life. Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off.

Drinker is very easy to clean--no disassembly for cleaning required. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection.

Thermostatically controlled to only run when needed. Ideal for use in Ponds 50 to 600 gallons. Constructed of Cast Aluminum for ultimate efficiency & safety. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete.

This sturdy tank is designed to carry two saddles and is easy to install. 44 1/2" x 13" x 19 3/4". Carry 30 gallons of water with you right in the tack compartment of your trailer.

Won't rust, resists rot & hold up to chemically active soil conditions. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

SPI 351 (old style) gasket only.

Protective cage permits use in all tanks. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Thermostaically controlled to only run when necessary.

Won't rust, resists rot & hold up to chemically active soil conditions. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level. Robert's Brass 3/8" orifice Valve complete with plunger and arms.