Livestock Waterers Farm Supplies For Sale In Los Angeles

Robert's 3/4" leather cup ring that fits on the brass plunger.

O'Ring only replacement for Frost Pro Accessory.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series. Greater tolerance to operation in dirty conditions; 4. Simplicity -- few parts; 2. The VP2 uses the same Base, Assembly Nut and O-Ring of the old VP1 making conversion...

Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water hammer 3/4″-2 1/2″ water level differential (increases as water inlet pressure increases)...

Guaranteed for 1 year & SAFE IN PLASTIC. Unit is unnoticed by livestock - no cord in water. Thermostatically controlled to only run when necessary. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

This repair kit fits the Models 101, 202 & 404 with or without heat.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Protect your underground water line from freezing. Can be used with Mirafount or other brand installations. 14" x 30" long, 2" thick.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

XtraFlo is UV stabilized and corrosion resistant. XtraFlo compact diaphragm valve has full-flow, high volume fill. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

Robert's Brass 1/2" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

The inside base of the Franklin Valve. No inside working parts included. This piece holds the plunger and upper arm.

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Trough-O-Matic Stock Tank Float Valve with Plastic Housing flows up to 245 gallons per hour and operates between 10-70 psi. Attaches to standard ¾” garden hose. Rugged plastic housing is molded from high-grade polystyrene.

For tanks with thicker walls such as concrete or wood, order the optional Breather Collar Kit. The Freeland Valve for livestock watering tanks is automatic, adjustable, approved non-siphoning, corrosion-proof and freeze-resistant.

Upright Water Caddy Stand (24694) will work with this water caddy. This tank fits conveniently into the "dead space" in the corner of the walk-in tack room. White 14 1/2" x 14 1/2" x 56" tall.

Use this valve assembly with the J303 with without heat.

14” side panels x 14.5” front panel x 72” tall. Comes standard with two shut-off valves, one for hose and the other for filling a bucket. No stand available for this water caddy.

Notched flanges for easy anchoring. Seamless sidewall cannot leak. Optional wing bolts are available for Grade A inspections. Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.

Guaranteed for 1 year & SAFE IN PLASTIC. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Protective cage permits use in all tanks.

Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

Dimensions: 25" x 20" x 23". Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float valve *External...

Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Valve works with up to 70 lbs. The rust-proof plastic cover is fitted with a 3/4" female hose connection.