Livestock Waterers Farm Supplies For Sale In Lexington Fayette

Connects valve to 301 round float. A brass rod float arm 1/4" x 8" with threads on each end.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

Capacity is one-half pint (1 cup). Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage.

SPI white corrugated baffle for model 4x4 energy free waterer.

3/4" male to female hose used to hook up the water line to the waterer.

Valve 36" Float Cord Only.

This unit fits the Model 101, 202 & 404 with or without heat.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Aqua Blue color only. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. All edges have been rounded for safety & strength.

Tanks measure 63 1/2" L x 18" W x 12" deep. (Manufacturer recommends also securing with ratchet tie downs.) Clear plastic allows you to see the water level easily. Also comes with two tie straps.

600 watt x 120 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water hammer 3/4″-2 1/2″ water level differential (increases as water inlet pressure increases)...

3-year warranty. Made to either fit ahead or behind the fender wells, with convenient access to water fill caps on both sides. Center of water tank tapers down in the middle for visibility.

Guaranteed for 1 year & SAFE IN PLASTIC. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm. Constructed of Cast Aluminum for ultimate effiency & safety.

It will take abuse! 15" OD, corrugated plastic tubing. Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

Connects valve to 301 round float. A brass rod float arm 1/4" x 5" with threads on each end.

Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float valve *External Adjustment Screw for water...

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve with European Thread for 1-140 PSI with 1/2" female thread is 5" high and 3" in diameter.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Ideal for use in Ponds 50 to 600 gallons. The most durable floating tank de-icer available with 1250 Watts. Features heavy duty anti-chew protector. Constructed of Cast Aluminum for ultimate efficiency & safety.

Robert's 1/2" rubber plunger seat only.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.