Livestock Waterers Farm Supplies For Sale In Kelowna

Repair Kit for 716H Valve. Includes screen, retainer ring, diaphragm, shut-off pad and float.

Trough-O-Matic Float Valve Repair Kit

There are four base screws that hold the top base to the bottom base. These are not included when ordering a base only.

SPI 90 degree elbow for all models.

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm. #5 on breakdown.

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

This diaphragm fits all Jug Model Valves.

This Dare anti-siphon farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Heating element ONLY for the Johnson Concrete Model J360.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. 3 year warranty. The tank also comes with a 1.25" drains installed.

Use this valve assembly with the J303 with without heat.

#2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. No other parts come with the Cam Link. This is the arm that opens & closes the plunger.

Corrugated design provides rigidity without bulk when back filled with earth. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe.