Livestock Waterers Farm Supplies For Sale In Iowa

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

The Hudson Valve"s unique design maintains fluid level in tanks and troughs with an exceptional patented float system. Each valve comes with installation instructions, warranty information and parts list.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

It not only ends flooding, breakdown and water loss, it also does away with breakage of floats, balls, and lever arms by livestock. The positive shut-off feature functions in an 8 psi to 140 psi water pressure range.

This smaller sized water tank for the corner of your tack room takes up less space. 2 water valves, one at the bottom and the other 14" from the floor. No stand available for this water caddy.

Measures 37” x 27 1/2” x 13”, ash grey color. 5-year warranty. 35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug).

35 gallon FDA approved plastic is warranted for 3 years. Comes with an 8' heavy duty hose with ball valve to fill from the bottom, 2 mounting straps to secure it to hay rack. 3 year warranty.

6.75" L x 9.5" W x 13.125" H. Little Giant Baby Pig Waterer can be used as early as the day after farrowing. Little Giant Baby Pig Waterer includes impact resistant polyethylene jug and base, plus metal tray with mounting holes.

This piece holds the plunger and upper arm. No inside working parts included. The inside base of the Franklin Valve.

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 5/32" Orifice on a VP124 Valve.

Megaflow Yellow Float Only.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

#2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. No other parts come with the Cam Link. This is the arm that opens & closes the plunger.

Maximum 24-hour electrical use is 1.56 kwh. Dimensions: 41" x 20" x 23". Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to...

Guaranteed for 1 year & SAFE IN PLASTIC. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Protective cage permits use in all tanks.

Optional heater, 250 watts, 110 volts. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations.

Extra supply line protection, patented water circulation, multiple constant flow and drain options. 70 Gallon Open Trough Tank offers more features. It has 70 inches of drinking length and holds 70 gallons.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. Won't rust, resists rot & hold up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth.

1000 watt x 240 volt heating element only. Arkfeld waterer element replacement.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

They mount above or below the water and give flows of up to 6 gallons per minute. FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built...

Provides just the right height to fill buckets without a hose. Includes storage compartment. Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021).

Apex replacement float with string included.