Livestock Waterers Farm Supplies For Sale In Indianapolis

SPI 351/352 (old style) Rubber Drain Plug only .

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The top entry model provides an air gap, preventing back-flow. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long...

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

Float Arm for the Mira Fount M3330 waterer.

Heating element ONLY for the Johnson Concrete Model J360.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Thermostatically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers.

Robert's Brass cotter key that connects the long arm to the valve body.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

#12-3 on the breakdown. This part number is for the arm only & is usually used on the Polar Max waterers. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9 cm) AND external 2" (5.1 cm) drains. THE RACE IS OVER. Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

This water caddy has come in handy for transporting water on trips as well as out to the field to water livestock. The only drawback is that if the nozzle is attached, I cannot close the tail gate on my truck.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Robert's 3/4" rubber cup ring that fits on the brass plunger.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The top entry model provides an air gap, preventing back-flow. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long...

Valve 36" Float Cord Only.

Six 9.5” openings with 10.75” ball closures. Includes stainless steel anchor bolts. This unit features removable end panels to help get new cattle started fast or to provide more capacity for a few extra head.

Waterers work on the same principle as a thermos bottle. Eliminates algae problems as water is not exposed to sunlight. The floats seal the water away from outside. Now a waterer that requires no electricity, so it saves 100% of your energy costs.

Ideal for use in Ponds 50 to 600 gallons. Features heavy duty anti-chew protector. Thermostatically controlled to only run when needed. Constructed of Cast Aluminum for ultimate efficiency & safety.