Livestock Waterers Farm Supplies For Sale In Indiana

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Mostly used on cattle waterers. Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

SPI foamed 4x4 energy free waterer door only.

SPI white corrugated baffle for model 4x4 energy free waterer.

Fluid level forces the float to rise and close the diaphragm chamber, which expands to stop incoming flow. The Hudson Valve"s unique design maintains fluid level in tanks and troughs with an exceptional patented float system.

This unit is insulated with 3 1/2" of polyurethane insulation. Specs: It is 36" wide x 41" long x 19" tall. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates...

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

Use this valve assembly with the J303 with without heat.

SPI 4x4 Rubber Drain Plug only.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

The water basin holds 15 gallons of water and refills to your level of desire. Keep your animal's water clean and fresh! Promote important water consumption with fresh clean water.

No inside working parts included. The orange male fitting end of the Franklin Valve.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Robert's 1/2" rubber plunger seat only.

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and has a capacity of 375 gallons per hour. Valve works with up to 70 lbs. The rust-proof plastic cover is fitted with a 3/4" female hose connection.

8' 2" Diameter x 26" H 113# 5 Year Warranty The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected...

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Same description as J101 EXCEPT THIS UNIT HAS NO HEAT.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Ships truck line only. Made to either fit ahead or behind the fender wells, with convenient access to water fill caps on both sides. An innovative way to haul fresh water in your pickup bed while still allowing for easy hook-up to a gooseneck trailer.

Connects valve to 301 round float. A brass rod float arm 1/4" x 10" with threads on each end.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.