Livestock Waterers Farm Supplies For Sale In Hayward

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

No inside working parts included. This piece holds the plunger and upper arm. The inside base of the Franklin Valve.

The low profile design & fully hinged door provids animals better access to the capacity of the water & combination water gasket & foam gasket ensures an airtight seal between the lid & base.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Capacity is one-half pint (1 cup).

The new Value Series waterers from SPI are a "no tools required" waterer. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights.

15" OD, corrugated plastic tubing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth.

SPI 4x4 Rubber Drain Plug only.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

White styrofoam round disc float only.

XtraFlo compact diaphragm valve has full-flow, high volume fill. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. XtraFlo is UV stabilized and corrosion resistant.

5 year warranty. With a 40 gallon capacity the waterer has a maximum usage of 200 Beef cows or 90 Dairy cows. Finally, the waterers are designed with rounded corners to handle livestock abuse while ensuring livestock safety.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI foamed 4x4 energy free waterer door only.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

No stand available for this water caddy. 10 1/2" side panels x 11 1/4" front panel x 71" tall. 2 water valves, one at the bottom and the other 14" from the floor. 2 mounting straps.

Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations. Foam filled-R value of 7.5 per inch. Simple water level adjustment, easy to clean.

37 1/4"L x 28" W x 12 3/4" H 11 # 5 year warranty Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red & Tan available by special order. The one piece construction eliminates cracking and splitting common in plastic-welded,...

Simple water level adjustment, easy to clean. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Easy access to valve and heater. Water horses, calves, wildlife with Performance One model WP06 .

15" OD, corrugated plastic tubing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

The only drawback is that if the nozzle is attached, I cannot close the tail gate on my truck. This water caddy has come in handy for transporting water on trips as well as out to the field to water livestock.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

The brass arm and black round ball float only for an Apex Valve.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.