Livestock Waterers Farm Supplies For Sale In Georgia

It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice. 2-2" drain holes for fast clean out. Optional wing bolts are available for Grade A inspections.

White styrofoam round disc float only.

Fluid level forces the float to rise and close the diaphragm chamber, which expands to stop incoming flow. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

Megaflow Yellow Float Only.

Grade A compliant. Water circulation is assisted with our patented baffle design and discharge ports. Float is easily adjustable for varying water levels, Spring loaded pin allows access panel to pop off with the twist of a screwdriver.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well as other energy-free drinkers. VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series.

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.

B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached) B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Valve works with water pressures from 12 to 125 psi. The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it operates with a simple reliable design requiring no floats, rods or guards.

Ideal for use in Ponds 50 to 600 gallons. Constructed of Cast Aluminum for ultimate efficiency & safety. Thermostatically controlled to only run when needed. Features heavy duty anti-chew protector.

Fluid level forces the float to rise and close the diaphragm chamber, which expands to stop incoming flow. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

The rust-proof plastic cover is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs. Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

1 1/4" pipe plug that will accept a heater or float valve system. Tank dimensions: 51 1/2" long, 29" wide, 24" high.

57.5” x 45.5” x 20” tall. For large feed lot, dairy or cow/calf operations. Capactiy: 250 head of beef, 120 head of dairy or 200 cow/calf pairs. 5-year warranty. Six 9.5” openings with 10.75” ball closures.

Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the valve. Capacity: 50 hd beef, 30 horses, 1-9" ball closure 26" x 28" x 16" tall.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The wall mounted 303 JUG is perfect for existing barns or new installations. They don�t have to learn to lift flaps or push balls and floats are out of the way; they just use their natural sucking method to drink from the open hole.

Thermostat ONLY for all Johnson Concrete Waterer Models.

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.