Livestock Waterers Farm Supplies For Sale In Fort Collins

White styrofoam round disc float only.

The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it operates with a simple reliable design requiring no floats, rods or guards. Included with the Valve is a universal mounting kit which permits hook-up...

The inside base of the Franklin Valve. This piece holds the plunger and upper arm. No inside working parts included.

ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. No other parts are included with this Power Link. #1 on breakdown.

Hollow black plug used in all Franklin galvanized waterers.

Pride of the Farm 5/32" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

5-year warranty. Tank dimensions: 51 1/2" long x 29" wide x 14" high.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

Connects valve to 301 round float. A brass rod float arm 1/4" x 12" with threads on each end.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

Use for horses, sheep, calves and other livestock. Powder coated, anti-bacterial steel bowl has non-siphoning float to maintain constant water level. Water line entry on either side with 1/2" brass fitting.

White polyethylene disc float only.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Connects to 3/4" garden hose or adaptable for pipe. We stock all replacement parts. This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

It not only ends flooding, breakdown and water loss, it also does away with breakage of floats, balls, and lever arms by livestock. The positive shut-off feature functions in an 8 psi to 140 psi water pressure range.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

1000 watt x 240 volt heating element only. Arkfeld waterer element replacement.

Unit measures 7" in diameter, 110v, 1000 Watts. Thermostatically controlled to only run when necessary. SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir.

Two large drink openings 8" x 14" each. Second, our supply line is in the water. 100% poly construction. No loose parts to lose. Tough enough for years of outdoor use. You don't need extra heat to keep the line above the ground open.

It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice. The WPM10 is an extremely rugged 2 door opening, energy free unit for sheep & calves.