Livestock Waterers Farm Supplies For Sale In Elgin

The orange cap only that fits over the insides of the Franklin Valve.

White styrofoam triangular disc float only.

SPI white corrugated baffle for model 4x4 energy free waterer.

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

This unit fits the Model 101, 202 & 404 with or without heat.

The MicroSweeper requires no maintenance, no electricity and no adjustment, EVER. The quality construction and very precise control ensures the most economical usage of water and the least amuont of labor in preventing waterer ice formation for many years.

More drinking length. It is loaded with features not available on any competing trough drinker. Warmer water pushes through the ports and cooler water returns under the baffle. It has 70 inches of drinking length and holds 70 gallons.

VP2, from our program of continuous improvement, is designed to accomplish several things. Greater tolerance to operation in dirty conditions; 4. If your drinker originally took a VP124, order a VP224, etc.

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

It is FDA & HPB approved, food grade, recyclable plastic. And a MINI USE of 10 mature adult head. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged & commonly available at farm supply...

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

1 1/4" pipe plug that will accept a heater or float valve system. Tank dimensions: 51 1/2" long, 29" wide, 24" high.

Do Not Immerse into liquid. 450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater.

Other components 5 years unconditional warranty and an additional 6 year pro-rated warranty. There are no loose parts, Lower access panels on each end. 70 Gallon Open Trough Tank offers more features.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. No other parts are included with this Power Link. #1 on breakdown.

High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability and longevity.

Valve 36" Float Cord Only.

Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers.