Livestock Waterers Farm Supplies For Sale In Des Moines

This bolt package is for Models 101, 202 & 404 with or without heat.

Pride of the Farm Element for electric waterer units.

Arkfeld waterer element & thermostat replacement. 600 watt x 240 volt heating element with surface mount thermostat included.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

The Megaflow is compact, robust and manufactured from non-corroding materials. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord...

Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI hatch cover for model 4x4 energy free waterer.

The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

Robert's 3/4" rubber plunger seat only.

No More Frozen Livestock Waterers with the Ice Sweeper Benefits: * Livestock will have access to water because surface ice will not build up in a waterer with a properly installed Ice Sweeper * The thermally activated discharge of water through the Ice...

5-year warranty. 35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug). Measures 37” x 27 1/2” x 13”, ash grey color.

Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021). Includes storage compartment. Can only be used with the Upright Water Caddy (24183). Provides just the right height to fill buckets without a hose.

It's designed to be positioned at the back or front of a fender well with convenient and easy access to water fill caps located on both sides. The only drawback is that if the nozzle is attached, I cannot close the tail gate on my truck.

This economy tank-side mounting bracket fastens securely with a thumb screw and bushing--no tools needed! Connects directly to garden hose, and fits all standard tanks and some plastic tanks.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

In operation, the MicroSweeper turns on at 41 degrees (F) and turns off at 42 degrees (F). The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

Same desription as the J202 EXCEPT THIS UNIT HAS NO HEAT!

Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm. #5 on breakdown.