Livestock Waterers Farm Supplies For Sale In Coral Springs

B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref. 14, 15, 16 in parts list.

SPI white corrugated baffle for model 4x4 energy free waterer.

Each opening is 5" x 9", Superb supply line protection. Grade A compliant. Float is easily adjustable for varying water levels, Spring loaded pin allows access panel to pop off with the twist of a screwdriver.

White styrofoam triangular disc float only.

No heat well needed; use an 8-12" tile; can be fitted on most existing pads. Tolerance to water level - you don't have to worry about summer & winter water levels. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built in check valve Fully adjustable Float Angle Pressure range 0-150 PSI Low pressure...

3/4" male to female hose used to hook up the water line to the waterer.

Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Screw that holds the float connect to the top of the float.

#3 on breakdown. Pride of the Farm VP124 plastic valve body only. No lock pins or inner parts included.

Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The top entry model provides an air gap, preventing back-flow. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

The top entry model provides an air gap, preventing back-flow. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Water pressure and 375 gallons per hour capacity. The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

Simplicity -- few parts; 2. VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well...

And a MINI USE of 10 mature adult head. An Earth Tube is suggested with installation. This waterer has a MAX usage of 120 Beef, 50 Dairy or 135 Sheep. Drinking height is 15" Door Opening is 9 1/2" x 9 1/2" and trough holds 17 gallons of water.

Guaranteed for 1 year & SAFE IN PLASTIC. Thermostatically controlled to only run when necessary. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm. Constructed of Cast Aluminum for ultimate effiency & safety.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...