Livestock Waterers Farm Supplies For Sale In Colorado Springs

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float.

Connects valve to 301 round float. A brass rod float arm 1/4" x 10" with threads on each end.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms.

Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 1/4" Orifice on a VP124 Valve.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

3/4" orfice only for the inside of a Franklin Valve.

Made of Strangkolon-nylon material. This non-siphoning bowl is extremely resistant to damage and is easy to keep clean. The pressure plate is made of the same strong nylon material, and provides fresh, clean water.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

80 Watt Immersible element used in the PC 1 waterer.

The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe. Valve works with up to 70 lbs.

#3 on breakdown. No lock pins or inner parts included. Pride of the Farm VP124 plastic valve body only.

Pride of the Farm Link pin only. The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. #4 on breakdown

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit. Meets "Grade A" Dairy requirements (non-siphoning). The polyethylene used in our SPI Livestock Waterers is FDA and HPB approved, food grade, recyclable plastic.

SPI foamed 4x4 energy free waterer door only.

This tank fits conveniently into the "dead space" in the corner of the walk-in tack room. 25-gallon FDA approved plastic has a valve located at the bottom of the tank which allows you to water your horses in transit, or at your destination with water...

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking and splitting common in plastic-welded, two piece...

#1 on breakdown. No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

Float Arm for the Mira Fount M3330 waterer.

Includes seat and float. Repair Kit for Water Control Valves model 825H , 825P , 830H , 830P , 825ASH and 825ASP .