Livestock Waterers Farm Supplies For Sale In Clarksville

And a MINI USE of 10 mature adult head. An Earth Tube is suggested with installation. Result = cleaner waterer inside & out. This waterer has a MAX usage of 120 Beef, 50 Dairy or 135 Sheep.

SAFE IN PLASTIC TANKS. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures.

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Megaflow Yellow Float Only.

This unit fits the Model 101, 202 & 404 with or without heat.

SPI 351/352 New Generation Gasket.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

Constructed of an FDA-approved plastic. The upright water tank has a cap at the top for easy filling. Has a 3-year manufacturer's guarantee. Clear plastic allows you to see the water level easily.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 1/4" Orifice on a VP124 Valve.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

No more-no less. It is a thermal sensing valve that is constatly in contact with the water & "intermittently" releases enough pressurized water to prevent surface ice as the water temperature dictates.

No other parts come with the Cam Link. This is the arm that opens & closes the plunger. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. #2 on breakdown.

Has 2” to 3” urethane foam insulation. 30.5” x 16.5” x 27” tall. Removable dome for quick and easy access to valve area. Sloped bottom for easy clean-out. Approximately 48 lbs.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI white corrugated baffle for model 4x4 energy free waterer.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. All edges have been rounded for safety & strength.

A great new way to haul additional water for your animals in your trailer or in the back of the pickup. This round barrel-shaped tank holds 35 gallons of water.

No inside working parts included. This piece holds the plunger and upper arm. The inside base of the Franklin Valve.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

XtraFlo is UV stabilized and corrosion resistant. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. XtraFlo compact diaphragm valve has full-flow, high volume fill.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Constructed of an FDA-approved plastic, the Hay Rack Water Caddy comes with a 8' hose kit and shut-off valve to allow filling from the ground. Also comes with two tie straps. Hay rack not included.