Livestock Waterers Farm Supplies For Sale In Charlotte

No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation. The bottom has a cavity for warm climate installations only.

5 year warranty. The VS15E is molded from a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It's design reduces stock damage and minimizes blockage.

Thermostatically controlled to only run when necessary. Designed to fit into narrow opening in any hog waterer resevoir. SAFE IN PLASTIC. Unit measures 7" in diameter, 110v, 1000 Watts.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Guaranteed for 1 year & SAFE IN PLASTIC. Constructed of Cast Aluminum for ultimate effiency & safety.

Robert's 1/2" rubber plunger seat only.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

2-2" drain holes for fast clean out. Unique baffles guard against icing & keep valve operating under severest conditions. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

Can only be used with the Upright Water Caddy (24183). Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021). An added bonus is a 7 1/3” wide x 5 1/2” tall opening for additional storage.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve for 1-140 PSI with 1/2" female thread is 5" high and 3" in diameter.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Guaranteed for 1 year & SAFE IN PLASTIC. Constructed of Cast Aluminum for ultimate effiency & safety.

Protective cage permits use in all tanks. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Guaranteed for 1 year & SAFE IN PLASTIC.

ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

Blue Flap for WPM20 Cattle Waterer

15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Corrugated design provides rigidity without bulk when back filled with earth. It will take abuse!

SAFE IN PLASTIC TANKS. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. 1 year warranty. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed...

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.

A brass rod float arm 1/4" x 1 1/2" with threads on each end. Connects valve to 301 round float

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.