Livestock Waterers Farm Supplies For Sale In Carrollton

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

Backed with the strongest warranty available. Warmer water pushes through the ports and cooler water returns under the baffle. 70 Gallon Open Trough Tank offers more features. Extra supply line protection, patented water circulation, multiple constant...

XtraFlo is UV stabilized and corrosion resistant. Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Rubber shut-off pad and ABS plastic and stainless steel internal parts ensure long life. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

SPI foamed 4x4 energy free waterer door only.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

Both the water line & the electrical supply can enter from below. You should use silicon caulk to assure an airtight fit. The heat tube is designed to mate with the cavity under the drinker base.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Robert's 3/4" leather cup ring that fits on the brass plunger.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Each model comes with anchors for mounting to concrete pad, pipe insulation, and a section of 3/4" PVC pipe. 24" X 36" X 18" Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the valve.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

The Robert's 3/4" brass valve housing only.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

SPI hatch cover for model 4x4 energy free waterer.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 1/4" Orifice on a VP124 Valve.

* The Ice Sweeper comes with a full 3-year limited replacment warranty, exclusive only of exposed seals. * Labor presently used to open & close bleeder valves can be eliminated. * The device is all mechanical, no electricity required and built with quality...

Use this valve assembly with the J303 with without heat.

Tolerance to water level - you don't have to worry about summer & winter water levels. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

We stock all replacement parts. Connects to 3/4" garden hose or adaptable for pipe. This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Blue Flap for WPM20 Cattle Waterer

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

SPI 351 (old style) gasket only.