Livestock Waterers Farm Supplies For Sale In Cape Coral

SPI 351/352 (old style) Rubber Drain Plug only .

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

14, 15, 16 in parts list. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref.

The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe. Water pressure and 375 gallons per hour capacity. Valve works with up to 70 lbs.

Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve. Suggested where sugar sand is a problem in the water supply.

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

SPI 90 degree elbow for all models.

We stock all replacement parts. This Dare farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4 garden hose or adaptable for pipe.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

The top entry model provides an air gap, preventing back-flow. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

The top entry model provides an air gap, preventing back-flow. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Maximum 24-hr electrical use on the Jug 101 is 1.56kwh. Dimensions: 25" x 20" x 23". Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction...

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

Our original float valve got broken during the barn remodel. We are all delighted to have the replacement installed - easy to do - and the waterer functioning perfectly.

This unit fits the Model 101, 202 & 404 with or without heat.

All edges have been rounded for safety and strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

Thermostat ONLY for all Johnson Concrete Waterer Models.

All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Drinker wells are 14" deep allowing most any animal to drink naturally. Notched flanges for easy anchoring. The Pride of the Farm the Performance One E-Drink is Energy Free You Only Need One Unit to Water Up to 150 Head of Most Any Species.

SPI foamed 4x4 energy free waterer door only.

White styrofoam triangular disc float only.