Livestock Waterers Farm Supplies For Sale In Arlington

Inside repair kit for Topaz & Megaflow Valve.

-Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker Opening is: 14.0"(35.6 cm )W 16.5"(41.9 cm) H 12.0"(30.5 cm) D

40 1/2" x 28 1/4" x 14 1/4" All edges have been rounded for safety & strength. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

Robert's Brass thumbscrew that connects the short arm and long arm.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Robert's 3/4" rubber plunger seat only.

80 Watt Immersible element used in the PC 1 waterer.

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

This diaphragm fits all Jug Model Valves.

35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug). Measures 37” x 27 1/2” x 13”, ash grey color. 5-year warranty.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

You will need 2 per valve assembly. #4 on breakdown Pride of the Farm Link pin only. The connect the Cam & Power Link to the VP124 valve body.

The Topaz is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. They are made for tanks which have the valve mounted above or below the water.

Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float valve *External Adjustment Screw for water...

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

White polyethylene disc float only.

The pressure plate is made of the same strong nylon material, and provides fresh, clean water. Can be mounted individually or back to back. Made of Strangkolon-nylon material. This non-siphoning bowl is extremely resistant to damage and is easy to keep...

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

We stock all replacement parts. This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.