Livestock Waterers Farm Supplies For Sale In Arkansas

SPI hatch cover for model 4x4 energy free waterer.

XtraFlo is UV stabilized and corrosion resistant. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. XtraFlo compact diaphragm valve has full-flow, high volume fill.

Anti-siphon feature makes this valve approved for Grade A dairy farms. Water pressure and 375 gallons per hour capacity. Valve works with up to 70 lbs. The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female...

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

SPI 351/352 New Generation Gasket.

We stock all replacement parts. This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

23" W x 27" L x 20" H SPI energy free models have a set back seal & drain to help couteract the problems associated with door freeze ups. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged...

Hollow black plug used in all Franklin galvanized waterers.

The orange cap only that fits over the insides of the Franklin Valve.

O'Ring only replacement for Frost Pro Accessory.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Robert's 3/4" rubber cup ring that fits on the brass plunger.

White styrofoam triangular disc float only.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

1/2" orfice only for the inside of a Franklin Valve.

You should use silicon caulk to assure an airtight fit. Both the water line & the electrical supply can enter from below. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add...

Robert's Brass cotter key that connects the long arm to the valve body.

Anti-siphon feature makes this valve approved for Grade A dairy farms. Water pressure and 375 gallons per hour capacity. Valve works with up to 70 lbs. The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & holds up to chemically active soil conditions. 15" OD, corrugated plastic tubing.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Attaches to standard ¾” garden hose. Rugged plastic housing is molded from high-grade polystyrene. Trough-O-Matic Stock Tank Float Valve with Plastic Housing flows up to 245 gallons per hour and operates between 10-70 psi.

Foam filled-R value of 7.5 per inch. Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9 cm) AND external 2" (5.1 cm) drains. Simple water level adjustment, easy to clean.

Available in Aqua Blue color only. 3 year warranty. 40 1/2" x 28 1/4" x 14 1/4" The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

Often used in Franklin & Arkfeld waterers. Turns on at 36 degrees and turns off at 48 degrees. Surface mount thermostat used in galvanized waterers.