Livestock Waterers Farm Supplies For Sale In Allentown

Water pressure and has a capacity of 375 gallons per hour. The non-corrosive metal case is fitted with a 3/4" female hose connection. Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Connects to 3/4 garden hose or adaptable for pipe. We stock all replacement parts. This Dare farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C).

SPI 351/352 New Generation Gasket.

SPI 2 1/2" Brass Short Float Stem only.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. The top entry model provides an air gap, preventing back-flow.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Both the water line & the electrical supply can enter from below. The heat tube is designed to mate with the cavity under the drinker base. You should use silicon caulk to assure an airtight fit.

Heating element ONLY for the Johnson Concrete Model J360.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

22 gallon capacity with a maximum usage of 150 Beef cows. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run off.

The positive shut-off feature functions in an 8 psi to 140 psi water pressure range. The valve is rustproof, antisiphon and installs in seconds to 1" pipe threads. It not only ends flooding, breakdown and water loss, it also does away with breakage of...

The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe. Anti-siphon feature makes this valve approved for Grade A dairy farms. Valve works with up to 70 lbs.

28 1/2" x 20" x 10 1/4" If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.

Robert's Brass cotter key that connects the long arm to the valve body.

Won't rust, resists rot & holds up to chemically active soil conditions. Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

Pride of the Farm 1/4" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

3/4" male to female hose used to hook up the water line to the waterer.

All edges have been rounded for safety and strength. High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability and longevity.

Operates effecicently at the bottom of the bucket because warm water rises. The 250W elemnt is encased in aluminum for durability & safety. SAFE IN PLASTIC. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures.

Over 300 square inches of access for easy hook up. You don't need extra heat to keep the line above the ground open. Two large drink openings 8" x 14" each. You do need proper installation to prevent the supply line underneath the drinker from freezing.