Livestock Waterers Farm Supplies For Sale In Alexandria

SPI 4x4 - 3/8" x 1" x 22' gasket only.

A round float for Arkfeld,SPI or Mira Fount waterers.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

1 year warranty. The 250W elemnt is encased in aluminum for durability & safety. Operates effecicently at the bottom of the bucket because warm water rises. SAFE IN PLASTIC. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures.

Optional heater, 250 watts, 110 volts. Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations. THE RACE IS OVER. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

Our drinker has foam filled double wall construction which adds to the efficiency. The Pride of the Farm "King" Energy Efficient drinker is beefy & ruggedly built but simple. There are no loose parts.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

Small inlet high pressure valve.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Guaranteed for 1 year & SAFE IN PLASTIC. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float. Thermostaically controlled to only run when necessary.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length.

This unit is insulated with 3 1/2" of polyurethane insulation. Up to 50% more usable water capacity than the competition. With a 40 gallon capacity the waterer has a maximum usage of 200 Beef cows or 90 Dairy cows.

Valve 36" Float Cord Only.

This round barrel-shaped tank holds 35 gallons of water. A great new way to haul additional water for your animals in your trailer or in the back of the pickup.