Livestock Waterers Farm Supplies For Sale In Alberta

The top entry model provides an air gap, preventing back-flow. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. Fully submerged valve is almost indestructible to livestock and models come in standard...

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

The rust-proof plastic cover is fitted with a 3/4" female hose connection. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Water pressure and has a capacity of 375 gallons per hour.

Connects valve to 301 round float. A brass rod float arm 1/4" x 2" with threads on each end.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

The brass arm and black round ball float only for an Apex Valve.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Constructed of Cast Aluminum for ultimate effiency & safety. Guaranteed for 1 year & SAFE IN PLASTIC.

Only water that is close to freezing is discharged. Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably when the threat of the water freezing is gone.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

The orange cap only that fits over the insides of the Franklin Valve.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Won't rust, resists rot & holds up to chemically active soil conditions.

Do Not Immerse into liquid. 450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater.

Valve 36" Float Cord Only.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

80 Watt Immersible element used in the PC 1 waterer.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

SPI 3.75" Brass Short Float Stem only.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage & minimises blockage. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

Polyethylene Blue in color. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. With quick release access clips for the hatch cover and access doors, installation and work...