Livestock Waterers Farm Supplies For Sale In Alabama

Up to 50% more usable water capacity than the competition. Finally, the waterers are designed with rounded corners to handle livestock abuse while ensuring livestock safety. This unit is insulated with 3 1/2" of polyurethane insulation.

Backed with the strongest warranty available. Grade A compliant. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Water circulation is a assisted with our patented baffle design and discharge ports.

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve for 1-140 PSI with 1" female thread is 5" high and 3.75" in diameter.

SPI 351 (old style) gasket only.

The top entry model provides an air gap, preventing back-flow. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

SPI 4x4 - 3/8" x 1" x 22' gasket only.

B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. 14, 15, 16 in parts list. B79P includes:Ref.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm. Guaranteed for 1 year & SAFE IN PLASTIC. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers.

6, 7 and 12 (see parts list in pictures attached) B81 includes: Ref. B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

All edges have been rounded for safety & strength. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Connects to 3/4" garden hose or adaptable for pipe. This Dare anti-siphon farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

Tank dimensions: 51 1/2" long, 29" wide, 24" high. 1 1/4" pipe plug that will accept a heater or float valve system.

White styrofoam triangular disc float only.

Connects to 3/4 garden hose or adaptable for pipe. This Dare farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. We stock all replacement parts.

Dimension: 50" x 33 1/4" x 24 1/4" Aqua Blue color only. 3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

This repair kit fits the Models 101, 202 & 404 with or without heat.

Trough-O-Matic Float Valve Repair Kit

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.